Media Resources

Posted 10/05/17

Woodworking Tool Roundup – Extreme How-To

Milescraft PocketJig200

The Milescraft PocketJig200 (#1323) allows you to connect your work pieces in a quick and timely manner. Whether you want to build storage projects, cabinets, shelves or bookcases, this pocket-screw kit does it all. Use it to create corner joints, T-joints, framing joints, miter joints, and make repairs. With built-in board thicknesses, there is no need to manually measure. Just set this jig to your desired setting, set the depth of your bit and start drilling. There are four common board thickness settings built into the jig: 1/2″, 3/4″, 1″ and 1-1/2″ (12, 19, 29, 38mm). The plastic carrying case contains everything you need to get started with your first pocket holes. Included are the following: Double barrel pocket hole jig, drill bit, T20 drivers (3 and 6 in.), quick connect, stop collar with hex key, plugs and an assortment of different sized screws. With this type of T20 screw head, you can get maximum torque on the screw with little chance of the screw hear stripping out.

1323 PocketJig200

Milescraft PocketJig100

Also from Milescraft, the PocketJig100 (#1321) gives you a quick and easy way to join workpieces with pocket screws and make small repairs around your house. The compact design allows you to do applications where a small jig is required. There are four common board thickness settings built into the jig: 1/2″, 3/4″, 1″, and 1-1/2″ (12, 19, 27, 38mm), virtually eliminating the need for manual measurements. The jig includes the following: single barrel pocket hole jig, drill bit, 6″ T20 driver, stop collar and hex key. This kit does not include the T20 screws that go with the driver, but they can be purchased separately. Any screws and driver can be used with this jig.

PocketJig100

Extreme How-To – October 2017 Issue – More Milescraft Products Featured!!!

 

ALL POSTS