Replacement Parts

25012 - Support Spring


SKU: 25012 Category:

||| Details

Average Review:
5.00 out of 5 based on 11 customer ratings

Join the Milescraft community and write a review for this product!


Add a review

  1. 5 out of 5

    (verified owner)

    More about Milescraft, the support is great and the part arrived on time.

  2. 5 out of 5

    (verified owner)

    fast shipping and exact what we needed

  3. 5 out of 5

    (verified owner)

    Perfect fit. I added the second spring to my drill guide to get even downward pressure.

  4. 5 out of 5

    (verified owner)

    Just what I needed, fast delivery

  5. 5 out of 5

    (verified owner)

    I bought the Milescraft 1318 Drillmate. It has only one spring on one side. I found that when pushing down on the head it felt like it wanted to tilt to one side and almost bind up due to uneven pressure caused by having just one spring. I ordered and installed another spring on the other post and it now feels much more even in the downward motion. But, two springs now make for more pressure needed to push downward. lighter springs of the same height would work or I can reduce the height by cutting the springs down a little at a time to find just the right amount of pressure needed. Even pressure is a must weather drilling at 90 degrees to the surface or at any other angle when using a tool like this. Aside from this I found the drill mate to work well for what it was designed for.

  6. 5 out of 5

    (verified owner)

    Exactly as expected.

  7. 5 out of 5

    (verified owner)

    All good

  8. 5 out of 5

    (verified owner)

    thanks all good

  9. 5 out of 5

    (verified owner)

    Exactly as expected

  10. 5 out of 5

    (verified owner)

    Great Addition !

  11. 5 out of 5

    (verified owner)

    Added spring to the other rail so there was one on both sides, much more stable. Milescraft please consider adding a spring to both sides from the get go.